B-1414SC Manual

Definitions:

OPENING INDEX is the mark at 12 o’clock position on the dial face.

CHANGING INDEX is the mark at 11 o’clock position on the dial face.

RIGHT is clockwise.

Open the Safe with Factory Code:

1. USE OPENING INDEX in this section.

2. Turn the dial to LEFT three rounds and then stop at 50 on OPENING INDEX.

3. Turn the dial to RIGHT to release the internal lock and the safe can be opened.

Change the Code with Factory Code:

1. USE CHANGING INDEX in this section.

2. With the safe door open, lock the lock.

3. Turn the dial to LEFT three rounds and then stop at 50 on CHANGIGN INDEX.

4. Insert the CHANGING KEY into the hole behind the door. Turn right quarter turn.

NOTE: The following three steps will set your new code, please pay attention!

5. Turn the dial to LEFT three rounds and then stop at first code on CHANGIGN INDEX.

6. Turn right two rounds and then stop at second code on CHANGIGN INDEX.

7. Turn left one round and then stop at third code on CHANGIGN INDEX.

8. Turn left of the key and remove it.

9. Now the combination code is set at first-second-third code.

10. Open the safe with new code.

Open the Safe with Costumed Code:

1. USE OPENING INDEX in this section.

2. Turn the dial to LEFT three rounds and then stop at first code on OPENING INDEX.

3. Turn right two rounds and then stop at second code on OPENING INDEX.

4. Turn left one round and then stop at third code on OPENING INDEX.

5. Turn right until the lock released.

Change the Code with Costumed Code:

1. USE CHANGING INDEX in this section.

2. With the safe door open, lock the lock.

3. Turn the dial to LEFT three rounds and then stop at first code on CHANGIGN INDEX.

4. Turn right two rounds and then stop at second code on CHANGIGN INDEX.

5. Turn left one round and then stop at third code on CHANGIGN INDEX.

6. Insert the CHANGING KEY into the hole behind the door. Turn right quarter turn.

NOTE: The following three steps will set your new code, please pay attention!

7. Turn the dial to LEFT three rounds and then stop at first code on CHANGIGN INDEX.

8. Turn right two rounds and then stop at second code on CHANGIGN INDEX.

9. Turn left one round and then stop at third code on CHANGIGN INDEX.

10. Turn left of the key and remove it.

11. Now the combination code is set at first-second-third code.

Example of Changing the Code with Costumed Code 10-20-30 to 90-80-70:

1. USE CHANGING INDEX in this section.

2. With the safe door open, lock the lock.

3. Turn the dial to LEFT three rounds and then stop at 10 on CHANGIGN INDEX.

4. Turn right two rounds and then stop at 20 on CHANGIGN INDEX.

5. Turn left one round and then stop at 30 on CHANGIGN INDEX.

6. Insert the CHANGING KEY into the hole behind the door. Turn right quarter turn.

NOTE: The following three steps will set your new code, please pay attention!

7. Turn the dial to LEFT three rounds and then stop at 90 on CHANGIGN INDEX.

8. Turn right two rounds and then stop at 80 on CHANGIGN INDEX.

9. Turn left one round and then stop at 70 on CHANGIGN INDEX.

10. Turn left of the key and remove it.

11. Now the combination code is set at 90-80-70.