SP-16 Manual

1. DOUBLE CODE SYSTEM:

Personal code (4-10digits), Master code (4-10digits).

Factory settings: Personal code: ‘1234’; Master code: ‘123456’.

2. OPENING THE DOOR:

First opening: install 4 AA batteries into the external battery case, plug in the outlet at the bottom of the faceplate, Enter # original personal code(or master code)# , insert the main key clockwise to open the safe.

Remove the batteries from the external battery case to the battery case on the back of the door. Now you can use the safe without the external power supply.

3. CLOSING THE DOOR:

Turn the key anti-clockwise to take out the key, the door would close.

4. CODE SETTINGS:

(1) CHANGE MASTER CODE:

With the door open, Enter # original master code#, when the OPEN show on the displayer window, Enter *new code# to set the new master code

(2) CHANGE PERSONAL CODE:

With the door open, Enter # original personal code#, when the OPEN show on the displayer window, Enter *new code# to set the new personal code

5. EMERGENCY OPENING:

If you have forgotten your personal code or for other reasons the safe cannot be opened, you can use the emergency key or the override master code to open the door.

6. Audit trail the opening records:

Enter # the personal code(or master code)# to open the door, when the OPEN disappear, the Blue backlight on, press 0 to audit trail the opening records, continue to press 0 for next opening records, 14 opening records are available.

7. SET THE DATE AND TIME:

Press “*” to set up the new date or time in 3 seconds.

Press 0 to decrease the number, 8 to increase the number.

Press “#” to switch between the date and time.

8. “HIDDEN CODE” FUNCTION:

Enter#*, it will come into hidden function, when you input the codes, it only show “ ” on the displayer. The code display will be recovered automatically after you open the safe.

9. CAUTIONS:

(1) Alarm function:

Alarm activated in case of 3 time wrong try

(2) LOW VOLTAGE:

When it lowers than 5V, whether the door is open or closed, it will show LO-BAT on the displayer.

(3) * is also a deletion key, pressing one time will delete one digit.